Dinner/Charter Yacht II

Dinner/Charter Yacht II

Addendum 1

The bar kit includes the following: 1 (9” x 6”) cutting board , 2 can and bottle openers, 1 (8”) wooden muddler, 6 (14”) grip tight trays, salt and sugar rimmer, 24 slow pourers with poly cork, 12 (32 ounce) plastic containers, 6 corkscrews, 2 (64) ounce Post Road pitchers, 3 two prong stainless steel bar strainers, 2 (28 ounce) stainless steel bar shakers, 2 (11” ) stainless steel bar spoons, 12 (60 ounce) clear pitchers, 2 bar caddies, 1 (6”) Wearever slicer, one Hamilton Beach mixer, 4 clear plastic scoops, one slim jim waste basket.



General Specifications

Regulatory File Insert Official Number 1126556 in the Vessel Number box and click “search”

Vessel Drawings – Deck 1, Deck 2, Hold, Main, Pilot House

Name Dinner/Charter Yacht II
Style Yacht
USCG Certified Yes
USCG Official Number 595082
Passenger Capacity 300 passenger plus 10 crew members
Gross Tonnage 100
LOA 116’6”
Hull Depth 10’0”

Custom Interior Decor

  • Interior design review
  • Excellent grade carpeting for the interior salon and pilothouse
  • Durable vinyl decking for the beverage bar, galley, and heads
  • Custom headliner with easy overhead access
  • Decorative covered valence
  • Custom laminated beverage bar including a three partition stainless steel sink, ice bin, two keg cooler, one refrigerator unit, one freezer unit, stainless steel speed rail, cash register and a bar kit (see addendum 1)
  • A galley below deck complete with an $80,000 allowance for equipment

Hull, Superstructure and Decks

  • Six watertight lighted compartments, with ladders to each, formed by five (1/4”) transverse bulkheads
  • Cofferdams and dedicated bilge pumps (12 VDC) for each stuffing box sump
  • 1/4” bottom plating, 1/2” in way of propellers, rudders and seachests, ¼” side shell plating 5086 H116 or H117 alloy marine grade aluminum hull built in accordance with American Bureau of Shipping (ABS) proposed “Guide for Building and Classing High Speed Craft”
    4.3/16” cabin plating, 6061 H116 or H117 alloy marine grade aluminum deckhouse built in accordance with American Bureau of Shipping (ABS) proposed “Guide for Building and Classing High Speed Craft”
  • Limber holes utilized throughout the interior framing of the hull
  • Lifting eyes designed into the transom, bow and pilothouse
  • Bolted soft patches over the two engines, with lifting eyes in the overhead deck girders for engine removal
  • Two main deck forward (36” wide) boarding gates
  • Two 6” bitts on the foredeck with hawse pipes and eight 4” single bitts
  • Two passenger stairways, and one service stairway between the main and upper (01) deck
  • 6” D section rubber rail fitted around the entire vessel
  • ¼” dark tint safety plate glass windows throughout the vessel
  • Thermal insulation utilized in the main cabin and pilothouse
  • Engine room acoustic insulation


  • Extensive propulsion and generator engine gauge arrangement with audible alarms (i.e., Engine temperature, engine oil, gear temperature, gear oil pressure, hydraulic oil level, fuel oil level, Murphy pneumatic bilge water sensors for the forepeak, voids 1and 3, engine room, void 5 and lazarette)
  • Hynautic model PSO 2200 (or equal) hydraulic steering system
  • Mathers Micro Commander (MMC) electronic (12 VDC) throttle and clutch controls
  • Raritan (or equal) rudder angle indicator
  • ICOM model M125 (or equal) VHF/FM marine radio with antenna
  • Datamarine model 3000 (or equal) depth sounder
  • 5” Ritchie model R5C (or equal) compass with anti glare binnacle and red light
  • 12” ITT (or equal) (12 VDC) remote controlled searchlight
  • Raytheon (or equal) five station loud hailer system including a headset in the engine room
  • Kahlenberg twin trumpet air horn
  • 8” bronze fog horn
  • Three windshield wipers with panographic arms
  • Wired for a cellular telephone system and antenna
  • Upholstered helm seat
  • Aiphone amplifier (or equal), Sony tuner, Sony compact disc player, Sony cassette tape player and 14 speakers

Mechanical Equipment and Engine Details

  • Engine service points aligned inboard of main engines
  • ACE (or equal) resilient mount system for the engines
  • Racor dual 1000 series turbine fuel filters with manifold valves
  • Walker Airsep filtration system
  • Engine mounted gauges to include oil pressure, tachometer, engine hours, lube oil pressure, engine cooling water temperature and gear oil pressure
  • Two Vernay Super II (or equal) muffler systems
  • Stainless steel fully water jacketed injection elbows and risers
  • Twin Disc model MG . : marine gears, close coupled with torsional dampers
  • Kahlenberg (or equal) (12 VDC) air compressor with ½ hp 8” diameter x 26” long integral tank
  • Lube oil change pump (12 VDC)
  • ¾ HP Hartzell series 38 WG4 (or equal) 24” diameter direct drive duct fan for the engine room mechanical exhaust fan rated @ 5150 CFM @ ½” static pressure
  • 2,000 gallon fuel oil capacity including clean-out access with a 1 ½” fill connection

Electrical System

  • Six uni-sex heads
  • Each head contains, one SeaLand Traveler model 510 (or equal) marine toilet, a sink with an automatic shutoff faucet, a mirror with perimeter lighting, waste receptacle, hand towel dispenser, an exhaust fan (115 VAC), and a custom mini blind
  • American with Disabilities Act specified assist railing in one head
  • 3000 gallon waste capacity with clean-out access with a 1 ½” pump out connection on port and starboard

Plumbing System

  • Valve hand wheels and actuators are color coated and piping is labeled with arrows denoting flow direction
  • gallon water heater
  • Fire and wash-down pump system to include a 2” x 1 ½” electrically driven self priming pump with a minimum capacity of 50 gpm @ 60 psi engaged at the pilothouse and engine room
  • Bilge (auxiliary fire) pump system to include a 2” x 1 ½” belt driven via a clutch self priming pump (24 VDC) with a minimum capacity of 50 gpm @ 60 psi engaged at the pilothouse and engine room
  • 5 gpm manual water pump with hose and appropriate fittings
  • ¾” potable water pump (12 VDC) with accumulator tank
  • 2,600 gallon potable water tank with clean-out access with a ½” fill

Coating System

  • The hull and deckhouse will be abrasive blasted to aid in the coating adhesion to the metal surfaces
  • Valspar urethane coatings applied per the manufacturers specifications
  • Polyurethane non-skid coating applied to the weather decks
  • Draft marks, name and port of registry marked on the vessel per regulatory agency
  • Aluminum or Zinc anodes depending upon the water salinity of the service area

Safety Equipment

  • 310 adult size type III and 21 child size type III personal floatation devices (PFD’s) with the ship’s name labeled
  • Three 22” life rings with the ship’s name labeled with life lines and one self activating light
  • Three fire extinguishers
  • One fire ax
  • An engine room fire damper pull
  • Pyrotechnic distress signals
  • One Danforth (or equal) 150 pound hot dip galvanized anchor with 6’ of chain and 30 fathoms of ¾ inch diameter line
  • One recovery ladder